background image

CONNECTING THE ATTACHMENTS  
Attachments  should  only  be  connected  and  removed  from  the 
nozzle when the steamer is switched off and the nozzle has cooled 

down. Once the steamer is switched off it should only take approx 

15 to 30 seconds for the nozzle to cool. 
This garment steamer includes two interchangeable attachments: 

 2-in-1 lint and bristle brush attachment for removing 

fluff and hair from garments, home furnishings and 
bedding. It is also great for fluffing up cushions, rugs 
and woollen underlays.  

Press attachment creates professional creased results 
on pants, shirt sleeves and collars in the convenience 
of your own home.  

 
To  attach  the  2-in-1  lint  and  bristle  brush  to  the  nozzle,  simply 
align the bottom of the attachment with the bottom of the nozzle 

(Fig.N). Push the top of the attachment forward until it clicks into 
place. The 2-in1 lint and bristle bush should then be attached to the 

nozzle and is now ready to use.
To  use  the  2-in-1  lint  and  bristle  brush  attachment,  use  it  in  the 
same manner as you would steaming a garment, making sure the 
white lint brush section and black brush bristles are making contact 
with the fabric. Depending on the fabric being steamed, you may 
make direct contact with the fabric.   
To remove, simply unclick the top of the attachment and pull away 
from the nozzle.  
 
To attach the press attachment to the nozzle, turn the attachment 
upside  down  so  that  the  clip  on  the  attachment  is  closest  to  the 

handle of the nozzle (Fig.O). Align the bottom of the attachment 

with  the  bottom  of  the  nozzle.  Push  the  attachment  up  until  it 
clicks into place. The press attachment should then be attached to 
the nozzle and is now ready to use.

Содержание CGS18A























Отзывы: