O
PERATION
4-9
UGE048/1103
CSC Combination Puller/Cutter
Exit or Prev
, If no change is required press Exit or Prev to
return to the previous Length Screen.
Raise
will increase the number by 1. The key can be pressed
once for each increment of 1 required or held down to scroll
up. Releasing the key will freeze the preset at the last value
then press enter.
Lower
will decrease the preset by 1. The key can be pressed
once for each decrement of 1 required or held down to scroll
down. Releasing the key will freeze the preset at the last
value then press enter.
Numeric keys
Key in the number required and press enter. If you require 4
presets key in 4 and then press enter.
Enter or Delete?
If the keyed in number is correct press the enter key for it to
be accepted and return to the Main Timer Mode screen. If it
is wrong press the delete key and the previous preset will
reappear.
TIME SCREEN
By pressing the soft key located under the word Time on the
Main Timer Mode Screen, the preset for the timer is avail-
able.
Additional information on how to access this screen can
be found in the operator display overview in Appendix E of
this manual.
The number shown is the current time preset value, i.e. the
time interval to cut the product. A cursor will appear in the
least significant digit. The user has a choice of ways to adjust
this number.
Exit or Prev
, If no change is required press Exit or Prev to
return to the Main Timer Mode Screen.
TIME 00000.00 0 sec
Exit
C
UTTER
C
ONTROL
I
NSTRUCTIONS
T
IME
S
CREEN
C
UTTER
C
ONTROL
I
NSTRUCTIONS
P
RESET TO
R
UN
S
CREEN
CONTINUED
Continued
