66
of a valid HTTP or HTTPS URL. An HTTPS URL indicates that
the ACS supports SSL. The “host” portion of this URL is used
by the CPE for validating the certificate from the ACS when
using certificate-based authentication.
ACS User Name
Username used to authenticate the CPE when making a
connection to the ACS using the CPE WAN Management
Protocol. This username is used only for HTTP-based
authentication of the CPE.
ACS Password
Password used to authenticate the CPE when making a
connection to the ACS using the CPE WAN Management
Protocol. This password is used only for HTTP-based
authentication of the CPE.
Connection Request
Authorization
Tick the checkbox
;
to enable.
User Name
Username used to authenticate an ACS making a Connection
Request to the CPE.
Password
Password used to authenticate an ACS making a Connection
Request to the CPE.
The
Get RPC Methods
button forces the CPE to establish an immediate connection
to the ACS. This may be used to discover the set of methods supported by the ACS
or CPE. This list may include both standard TR-069 methods (those defined in this
specification or a subsequent version) and vendor-specific methods. The receiver of
the response MUST ignore any unrecognized methods.
8.5
Internet Time
This option will automatically synchronize the router time with Internet timeservers.
To enable time synchronization, tick the corresponding checkbox
;
, choose your
preferred time server(s), select the correct time zone offset, and click
Save/Apply
.
NOTE:
Internet Time
must be activated to use
Parental Control
(page 48).
In addition, this menu item is not displayed when in Bridge mode since the
router would not be able to connect to the NTP timeserver.
