7
II-2. Initial Setup
1.
Connect the access point to a PoE Switch via an Ethernet
cable.
2.
Connect a computer to the PoE Switch via an Ethernet Cable.
3.
Wait a moment for the access point to start up. The access
point is ready when the LED is
green
.
4.
Set your computer’s IP address to
192.168.2.x
where
x
is a
number in the range
3 – 100
.
DHCP is enabled on the access by default. If no DHCP
Service is found, the access point will default to IP
address 192.168.2.1.
5.
Enter the access point’s default IP address
192.168.2.1
(or
reference your DHCP Client Table if a DHCP Server is present on
the network) into the URL bar of a web browser.
