6
Quick Setup
Your access point is preconfigured in a secured setup and ready
for use right out of the box. The following instructions will help you
install your access point and customize your settings.
II-1. Connecting the Access Point to Your Network
Connect a router (with a PoE Injector) or PoE switch to the access
point’s
LAN
port using an Ethernet cable. A PoE Injector or PoE
Switch
must
be connected to the access point’s
LAN
port.
The diagram below illustrates how to thread your installation cable through
the weatherproof cable fitting on the bottom of your access point.
II
