surpasses the voltage setup in advance, the radio would display “DC
LO” or “DC HI” to remind you that the voltage is not in normal state.
Meanwhile, the radio will prohibit transmitting and emit beep prompt.
OFF: When OFF is selected, the Power Supplying Voltage is disabled.
Default: ON (DC 10.5V-16V)
⑨
TLD (Content displayed on the LCD when transmitting)
This menu is to set the content displayed on the LCD when transmitting.
TF: When TF is selected, LCD would display transmitting frequency when transmitting.
SR: When SR is selected, LCD would display SWR value of antenna when transmitting,
for example: “1.2” on the LCD.
BAT: When BAT is selected, LCD would display Supplied Voltage when transmitting, for
example: “13.8DC” on the LCD.
TOT: When TOT is selected, LCD would display TOT remaining time when transmitting.
And TOT would count down till remaining time is 0, for example: “170”
displayed on the LCD display.
Default: TF
⑩
RBF (ROGER
BEEP Frequency Setting)
This menu is to select frequency of Roger Beep. The frequency range is 300KHZ—3KHZ.
The shift step is 10HZ.
Default: 1050HZ
⑾
RBT (ROGER
BEEP Holding Time)
This menu is to select Roger Beep Holding Time from 50ms—1000ms. The shift step is
