bars indicate SWR value other than PA or PWR value. One bar displaying on the LCD
indicates that SWR value is 1.0. Each additional bar indicates every 0.1 added value.
Repeat this operation to switch ON/OFF the function.
②
FUNC+
＋
SWR
When pressing this key, TOT ON or TOT OFF would display on the LCD for 2 seconds.
Repeat this operation to switch ON/OFF the function. When ON appears on the LCD,
users can press PTT to transmit. Then, the radio would time the transmitting duration.
Once the duration is beyond the set TOT time (programmable), the radio would emit
voice prompt and stop transmitting and back to receiving state automatically. This
function aims to protect the radio against power tube damage from superheating caused
by long transmission.
22. EMG
OR
S/RF
①
. EMG realizes Emergency Channel Call. When emergent situation happens, the
radio would switch to the channel set in advance to communicate immediately. Then
the “EMG” icon would display on the LCD . Press EMG key again to return to previous
channel.
②
FUNC
＋
S/RF
S/RF is SRF indicating switch of TX OR RX. When this function is enabled, “SRF”
icon would display on the LCD. Repeat the this operation to switch ON/OFF the
function.
<REAR
PANEL>
23. POWER
Accept13.8V DC power cable with built-in fuse (10 Amp) to be connected.
