- 2 -
Congratulations!
You are now the proud owner of a Comtek 40 Meter Vertical Antenna.
Specifications:
•
Full band coverage on 40 meters with SWR under 1.5:1 No Tuner needed
•
Bandwidth greater than 750 kHz with SWR under 2:1
•
Power Handling up to 5 kW
•
Weight: Approximately 15 pounds
•
Element Tubing: 6 element sections sized from 2" OD to 1.375" OD
•
Less than 35 ft overall height
•
Tunable above and below 7 MHz range for MARS and CAP frequencies
Parts List:
Description
QTY
Aluminum Mounting Plate, 12" x 8" x 1/4", Drilled
1
Element Insulator,
EXTREN
®
, 2.5" OD x 2" ID x 2" long, Split
2
Aluminum Cast Saddle 2.5", for Element Insulator
2
Stainless Steel U-Bolt 2.5", for Element Insulator
2
Hardware kit for U-Bolts (Nuts, Lock Washers, Flat Washers)
4
Studded Band Clamp, 2", with hardware (for Feedpoint Connection)
1
Element Clamp, Stainless Steel, for 1-1/2" antenna element
1
Element Clamp, Stainless Steel, for 1-5/8" and 1-3/4" antenna elements
2
Element Clamp, Stainless Steel, for 1-7/8" and 2" antenna elements
2
Stainless Steel Saddle for 2" V Bolts, for customer supplied mounting pipe
2
V-Bolt for 1 to 2" OD customer supplied mounting pipe
2
Black Vinyl Cap, for top of 1-3/8" OD antenna element
1
Aluminum Element - 1.375" OD x 72" x .058" Wall (split one end)
1
Aluminum Element - 1.500" OD x 72" x .058" Wall (split one end)
1
Aluminum Element - 1.625" OD x 72" x .058" Wall (split one end)
1
Aluminum Element - 1.750" OD x 72" x .058" Wall (split one end)
1
Aluminum Element - 1.875" OD x 72" x .058" Wall (split one end)
1
Aluminum Element - 2.000" OD x 72" x .058" Wall (split one end)
1
WARNING!
INSTALLATION OF ANY ANTENNA NEAR POWER LINES IS DANGEROUS
Warning
: Do not locate the antenna near overhead power lines or other electric light or power
circuits, or where it can come into contact with such circuits. When installing the antenna, take
extreme care not to come into contact with such circuits, because they may cause serious injury or
death.
