- 6 -
6. Install the Black Vinyl Cap on the top
element.
7. The two stainless steel V-Bolt Clamps are
used to secure the mounting plate to the
customer supplied mounting pipe described
earlier in this manual. When the antenna is
installed on the mounting pipe, tighten the
V-Bolts evenly so the length of the exposed
threads is approximately equal. Any V-Bolt
should be tightened evenly from side-to-
side with an equal amount of thread above
each nut.
8. Connect the center conductor of your
coaxial feedline to the studded band clamp.
The shield from your coaxial feedline must
connect to the base plate where you connect
your radial wires.
For 20 Meters
Frequency
MHz
Approximate
Overall Length
14.000
16 Feet, 8-1/2 inches
14.150
16 Feet, 6-1/2 inches
14.225
16 Feet, 5-3/8 inches
14.350
16 Feet, 3-5/8 inches
Figure 1
COMTEK 20 Meter
Vertical Antenna
Assembled Diagram
