Comtech EF Data RADYNE RRS11, Инструкция по установке и эксплуатации

Страница: 26 / 28

RRS11 Solid-State Transfer Switch Technical Specifications
MN-RRS11 5–2
Rev. 3
5.2.2 Power and Environmental
Prime Power: +12 VDC provided to the Unit through the Prime and
Backup Cabling from the Modulators
Operating Temp:
0 to 50°C, 95% Humidity, Non-Condensing
Storage Temp: -20 to 70°C, 99% Humidity, Non-Condensing
5.2.3 Physical
Size: 19” L x 17” W x 1.75” H
(48.26 cm x 43.2 cm x 4.45 cm)
Weight: 5 Pounds (2.27 Kg)
5.3 Introduction - RRS11 70/140 MHz Switch
This section defines the technical performance parameters and specifications for the Solid-State
Transfer Switch. The RRS11 is intended to operate with the DM240-PIIC or DM240XR modulators.
5.3.1 General Specifications
RRS11 70/140 MHz Configuration: DM240-PIIC OR DM240XR only
Switch Time: 50 msec Maximum
Rear Panel Ports: IF input: J7 - BNC (F), 75 ohm (mod A)
IF input: J8 - BNC (F), 75 ohm (mod B)
IF output: J6 - BNC (F), 75 ohm (online)
IF output: J9 - BNC (F), 75 ohm (offline)
IF Monitor input: J4: - SMA (F), 50 ohm (Mod A)
IF Monitor input: J5: - SMA (F), 50 ohm (Mod B)
Front Panel Ports: IF Monitor output: BNC (F) 75 ohm (Mod A)
IF Monitor output: BNC (F) 75 ohm (Mod B)
IF Monitor output: BNC (F) 75 ohm (online)
IF Monitor output: BNC (F) 75 ohm (offline)
Control Ports: DB-9 Male: J2 (prime)
Status Port: DB-9 Male: J3 (backup)
Return Loss: BNC: 20 dB
5.3.2 Power and Environmental
Prime Power: +12 VDC provided to the Unit through the Prime and
Backup Cabling from the Modulators
Operating Temp: 0 to 50°C, 95% Humidity, Non-Condensing
Storage Temp: -20 to 70°C, 99% Humidity, Non-Condensing
5.3.3 Physical
Size: 19” L x 17” W x 1.75” H
(48.26 cm x 43.2 cm x 4.45 cm)
Weight: 5 Pounds (2.27 Kg)