Comtech EF Data CDM-760, Инструкция по установке и эксплуатации

Страница: 87 / 441

FAST Activation Procedure Revision 4
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
5–2
5.2 About FAST Options
The FAST options are linked to three option registers:
•
Register 1 is for Data Rate, ACM, and CnC options;
•
Register 2 is for Modulation and Demodulation types, Optical Interface, and AUPC options.
•
Register 3 is for the K4 GZip lossless compression and decompression, Net Spec (DVB-S2,
DVB-S2-EB1/EB2X Network Specification), and DPD options.
Note the following:
•
When a FAST Access Code is obtained from Comtech EF Data, it will be for a specific
register .
• The CnC and K4 GZip FAST options require installation of the respective option card into the
internal modem board.
5.3 FAST Activation Procedure
5.3.1 FAST Activation Using the CDM-760 Front Panel
See Chapter 6. FRONT PANEL OPERATION for complete information about using
this product management interface.
Do these steps:
1. Before contacting Comtech EF Data Product Support to order FAST feature upgrades, obtain
and record the modem’s baseboard serial number:
a. Use the front panel
◄►
arrows keys to navigate to the SELECT: FAST menu, and then
press
ENTER
.
b. The modem’s 9-digit “Baseboard S/N” is displayed on the left hand side of the bottom
line, as shown in this example:
FAST: Options Demo-Mode CnC (◄ ►)
Baseboard S/N 012345678 Hw Rev##.##
c. Record the Serial Number: ______________________________________
2. To view currently installed FAST features, do these steps from the top-level SELECT: FAST
menu:
a. Use the
◄►
arrows keys to select OPTIONS , and then press ENTER :
FAST 1: Set View 2: Set View
OPTIONS 3: Set View (◄ ►▲▼)
b. Use the
◄►
arrows keys to select View for the
desired register #
, and then press
ENTER .
c. Use the
▲▼
arrow keys to scroll through the list of available FAST options. Options are
identified as ‘ Installed ’ or ‘ Not Installed ’. Any option listed as ‘ Not Installed ’ may be
purchased as a FAST upgrade.