Comtech EF Data CDM-760, Инструкция по установке и эксплуатации

Страница: 133 / 441

Front Panel Operation Revision 4
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
6–44
To change the DPD Min or Max Search Delay:
Use the   arrow keys to toggle between the
minimum or maximum delay value, and then use the  arrow keys to edit that value. Press
ENTER .
If DPD is being bench-tested with two units in a back-to-back configuration, the
minimum delay should be set to 0 ms, and the maximum to 20 ms. This takes into
account the lack of satellite delay.
6.2.2.8 (CONFIG:) Comp
K4 GZip Lossless Compression and Decompression is an optional feature that requires
installation of the Compression Card in the modem.
Compression: Disabled
Decompression: Disabled (


)
Use the
 
arrow keys to select Compression or Decompression . For either, use the

arrow keys to select operation as
Disabled
or
Enabled
. Press
ENTER
.
6.2.2.9 (CONFIG:) Remote
Remote Control=Ethernet
Inband=Disable
Use the
 
arrow keys to select Remote Control or InBand . Press ENTER .
6.2.2.9.1 (CONFIG: Remote) Remote Control
Use the  arrow keys to select a parameter. Press
ENTER
.
(CONFIG: Remote) Remote Control

Local
Select Local to limit monitor and control (M&C) of the unit only to the modem front panel.
Local control (front panel operation) is always available, regardless of which setting is
selected on this menu.
(CONFIG: Remote) Remote Control

Serial or Ser+Ethernet
Interface= RS-485-2W (232,485-2,485-4)
Address= 0001 38400 baud (


)
•
Select Serial to allow EIA-232/485 or Telnet remote access to the modem.
•
Select Ser+Ethernet (Ethernet) to allow all methods of remote access to the modem.
•
Use the   arrow keys to select Interface , Address , or (Baud rate) . Press ENTER . Then: