Comtech EF Data CDM-760 Скачать руководство пользователя страница 165

Страница: 165 / 441

Front Panel Operation

Revision 4

CDM-760 Advanced High-Speed Trunking Modem

MN-CDM760

6–76

6.2.8.2 (FAST:) Demo-Mode

FAST Options Demo Mode: Off

(



)

Time remaining: 29:23:59:50

FAST Options Demo Mode allows access to ALL CDM-760 FAST options for 30 calendar days. On

the

top line

, use the



arrow keys to select Demo Mode as

Off

. Press

ENTER

. The

bottom line

displays the

Time remaining

– the time format is

DD:HH:MM:SS

(days, hours,

minutes and seconds. Note the following:

•

The time count decrements only when Demo Mode is turned

. Demo Mode may be

turned on and off an unlimited number of times until the full 30 calendar days have expired.

•

Once the timer decrements to 00:00:00:00, FAST Options Demo Mode may no longer be

enabled. Your modem will still function with the purchased FAST enabled features.

If the Demo Mode timer reaches 00:00:00:00 while the modem is running a FAST

feature that is not a purchased FAST feature, the modem will fall into an invalid

state, turn off its carrier, and revert all settings to factory default settings.

6.2.8.3 (FAST:) CnC

FractionalCnC:Time Remaining: 90:00:00:00

Time Remaining Refills In 364:23:59:31

Full CnC License is installed.

Fractional CnC is common in 1:1 or 1:N redundancy systems where the primary modem is

running fully operational (i.e., FAST-activated) CnC, and the backup modem(s) has FAST-

activated Fractional CnC.

Fractional CnC allows 90 full calendar days of CnC usage in a calendar year. This lowers the cost

of the modem but does not allow for constant, round-the-clock CnC operation.

As per the previous screen examples, if Fractional CnC is not installed in the CDM-760, the

modem displays a message that no CnC license is installed and provides “time remaining” and

“time remaining refill” timers; or that a Full CnC license is installed and the screen displays

timers. Note the following:

•

FractionalCnC: Time Remaining

– This is the amount of time, in the form dd:hh:mm:ss

(days: hours:minutes:seconds), that that the modem can be run in CnC mode. This counter

decrements under the following conditions:

The modem has a FAST-activated Fractional CnC license

The modem is powered ON

The modem’s Tx is ON

The modem is in standalone mode or in 1:1 redundancy configuration and is Online

Содержание CDM-760


























































































































































































































































































































































































































































Результаты поиска

Содержание CDM-760

Отзывы:

Бренды по названию

Популярные бренды

Comtech EF Data CDM-760, Инструкция по установке и эксплуатации

Результаты поиска

Содержание CDM-760

Отзывы:

Бренды по названию

Популярные бренды