Comtech EF Data CDD-562AL, Инструкция по установке и эксплуатации

Страница: 90 / 244

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Ethernet-based Remote Product Management MN-CDD562AL564AL
7–4
Table 7-2 MIB-II SNMPv2 notifications
Cold Start 1.3.6.1.6.3.1.1.5.1
Link Up 1.3.6.1.6.3.1.1.5.4
Authentication Failure 1.3.6.1.6.3.1.1.5.5
The CDD-56xA/L supports these Alarms and Faults v1 traps / v2 notifications:
Table 7-3 Alarms and Faults SNMPv1 traps
cdd564aUnitAlarmTrap 6247941
cdd564aRxAlarmTrap 6247942
cdd564aLNBAlarmTrap 6247943
Table 7-4 Alarms and Faults SNMPv2 notifications
cdd564aUnitAlarmNotification 1.3.6.1.4.1.6247.94.2.1.1
cdd564aRxAlarmNotification 1.3.6.1.4.1.6247.94.2.1.2
cdd564aLNBAlarmNotification 1.3.6.1.4.1.6247.94.2.1.3
7.3.7 MIB-II
The demodulator agent uses RFC 1213, Management Information Base for Network Management of
TCP/IP-based Internets. This is known as “MIB-II” or “Public MIB support.” For detailed OID
information, see the MIB file.
The agent uses these Groups:
Table 7-5. MIB-II Support
Group Comments
System Group Mandatory for RFC1213
Interface Mandatory for RFC1213
IP Mandatory for RFC1213
ICMP Mandatory for RFC1213
TCP Mandatory for RFC1213
UDP Mandatory for RFC1213
SNMP Mandatory for RFC1213
Address Translation Group Implemented but depreciated in MIB-II
EGP Not applicable