Comtec MBT-4000 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 83

background image

MBT-4000 Multi-Band Transceiver System

Revision 6

Faults/Events

B–3

MN/MBT4000.IOM

B.2.2 Configurable Summary Faults

Configurable Summary Faults operate the same as Summary Faults, except Configurable
Summary Faults may be enabled/disabled via remote commands.

Table B-3. MBT-4000 Configurable Summary Faults

Mnemonic

Type

Mute

Description

AUXCOM1

Configurable

Summary Fault

Slot 1

The IO1A/FAULT input (AUX COMM 1) indicates a fault.
Monitoring for this fault is enabled using the EAM
command.

AUXCOM2

Configurable

Summary Fault

Slot 2

The IO2A/FAULT input (AUX COMM 2) indicates a fault.
The converter attached to UNIT 2 COMM (J6) has been
muted.

LNACUR1

Configurable

Summary Fault

Slot 1

The +12.6 V LNA A (AUX COMM 1) power supply current
has exceeded the maximum limit of 350 mA and has been
disabled. The converter attached to UNIT 1 COMM (J3) has
been muted. The LNA power supply—and thus this fault—is
enabled using the LCS command.
This fault is cleared by a LCS command or power cycle.

LNACUR2

Configurable

Summary Fault

Slot 2

The +12.6 V LNA B (AUX COMM 2) power supply current
has exceeded the maximum limit of 350 mA and has been
disabled. The converter attached to UNIT 2 COMM (J6) has
been muted. The LNA power supply—and thus this fault—is
enabled using the LCS command.
This fault is cleared by a LCS command or power cycle.

LNAWIN1

Configurable

Summary Fault

Slot 1

The +12.6 V LNA A (AUX COMM 1) power supply current is
outside  the programmed  window.  (The  power supply  is  not
disabled in response to this fault.) The converter attached to
UNIT  1  COMM  (J3)  has  been  muted.  LNA  current  window
monitoring  is  configured  and  enabled  using  the  LCS,  CLC
and LCW commands.
This  fault  is  cleared  by  a  LCS  command,  CLC  command,
LCW command or power cycle.

LNAWIN2

Configurable

Summary Fault

Slot 2

The +12.6 V LNA B (AUX COMM 2) power supply current is
outside  the programmed  window.  (The  power supply  is  not
disabled in response to this fault.) The converter attached to
UNIT  2  COMM  (J6)  has  been  muted.  LNA  current  window
monitoring  is configured  and  enabled  using  the  LCS,  CLC
and LCW commands.
This  fault  is  cleared  by  a  LCS  command,  CLC  command,
LCW command or power cycle.

REF LD

Configurable

Summary Fault

All

The  External  Reference  Monitor  has  lost  lock  with  the
external reference  signal.  All  attached  converters  (UNIT  1
and  UNIT  2)  have  been  muted.  Monitoring  for  this  fault  is
enabled  using  the  XRF  command.    This  fault  is  cleared
when lock has been regained.

LNAI1

Configurable

Summary Fault

Slot 1

The IO1A/FAULT input (AUX COMM 1) indicates a fault.
Monitoring for this fault is enabled using the EAM-1X
command.

LNAI2

Configurable

Summary Fault

Slot 2

The IO2A/FAULT input (AUX COMM 2) indicates a fault.
Monitoring for this fault is enabled using the EAM-2X
command.

«
...
70
71
72
73
74
...
»

Содержание MBT-4000




















































































Отзывы:

Нет отзывов

Похожие инструкции для MBT-4000

Бренд: EB TECHNOLOGY Страницы: 12

Бренд: Paradox Страницы: 2

Бренд: Yaesu Страницы: 40

Бренд: Yaesu Страницы: 35

Бренд: Yaesu Страницы: 39

Бренд: Yaesu Страницы: 2

Бренд: Yaesu Страницы: 15

Бренд: Leviton Страницы: 2

Бренд: Onkyo Страницы: 102

Бренд: M-system Страницы: 3

Satlook Micro G2

Бренд: emitor Страницы: 24

Бренд: tbs electronics Страницы: 15

Бренд: Strong Страницы: 23

Бренд: Patton electronics Страницы: 4

Бренд: Easy wave Страницы: 8

Бренд: Radio Shack Страницы: 37

Бренд: Omni-WiFi Страницы: 11

Бренд: Xantech Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды