COMPX RegulatoR, Инструкция по эксплуатации, Страница: 19 / 24

RegulatoR
®
, Keyless Locking 19
Add User to Specific Memory Slot (03 – 20)
The Supervisor code memory location is called Slot 01 and the first User code
is called Slot 02.
– Any additional user codes reside in memory slots 03-20.
–
To add a user code to a specific memory slot (03 -20), follow the steps
on page 9 to enter programming mode.
User codes must be 4 to 8 digits in length and must be different from all existing
codes (including Slot 01 Supervisor & Slot 02 User codes).
There is a 10 second programming time limit between each step. If RegulatoR
times out or an error is made, programming will end and you will need to enter
programming mode again.
1. Place RegulatoR into programming mode (see page 9).
2. Press 411 and then press ENTER.
3. Type memory slot to be added followed by ENTER (for memory slots
03 - 09, you must type leading “0” – e.g. “07” for slot 7)
4. Retype memory slot to be added followed by ENTER
5. Type the new user code and press ENTER.
6. Retype the new user code and press ENTER.
7. If successful, the yellow indicator light will illuminate.
Continue programming or press 9 and then ENTER to exit programming.