Computherm Q4Z, Руководство по эксплуатации

Страница: 4 / 12

- 4 -
An example of dividing the heating system into zones is shown in the figure
below:
From both a comfort and an energy-efficiency point of view, it is recommended
to activate more than one switch for each day. Furthermore, it is advised that a
comfort temperature is used only those times, when the room or building is in
use, since every 1 °C decrease of temperature saves approxi mately 6% energy
during a heating season.
2. THE CONNECTION POINTS OF THE ZONE CONTROLLER,
MOST IMPORTANT TECHNICAL DATA
•
Each of the 4 heating zones have an associated pair of connection
points (T1; T2; T3; T4); one for a room thermostat and one for a zone
valve/pump (Z1; Z2; Z3; Z4). The thermostat of the 1st zone ( T1 ) controls
the zone valve/pump of the 1st zone ( Z1 ), the thermostat of the 2nd zone
( T2 ) controls the zone valve/pump of the 2nd zone ( Z2 ) etc. Following the
heating command of the thermostats, 230 V AC voltage appears on the
connection points of the zone valves associated with the thermostats ,
and the zone valves/pumps connected to these connection points open/start.
For ease of use, the connection points associated with the same zone have
the same color (T1-Z1; T2-Z2, etc.).
living room bedroom 1 bedroom 2
230 V AC
boiler
distributor
manifold
floor h. manifold
floor h. distributor
collector
floor heat. distr.
floor heat. collect.