TM
Activation and Placement
9 | Copyright 2011 Firstech, LLC.
Dealer Activation
STEP 1:
The Drone’s SIM MUST be actived prior to powering on the DR-2000.
Complete all
connections. Leave harness unplugged from DR-2000.
STEP 2:
If you are a new DroneMobile dealer please visit https://live.dronemobile.com/login to
register your account. Click on “New Dealer Registration” and fill out the required information.
Your
account will be used for any and all future DroneMobile activations so please do not lose the
login and password.
STEP 3: Complete this step before plugging the main harness into the DR-2000:
Once logged in
you should be able to enter the 20 digit serial number and click “Submit.” The page will refresh and
Activation Status should change to “Active” after a few minutes. You can choose to hit the “Refresh”
button to see if the SIM has activated.
STEP 4:
Once the status changes to “Active” plug the main harness into the DR-2000.
STEP 5:
Wait for the unit to achieve cell lock (blue LED flashes slowly) Proceed to the “Settings”
page. The website will then walk you through the rest of the activation process first taking you to the
“Settings” page and then the “Controls” page. Please see the Troubleshooting section for description
of LEDs. Please complete all necessary tests of the DR-2000.
Note:
If you close your testing window or leave it without any activity for 20 minutes, you will not be
able to further test the customer’s DR-2000. Please make sure all installation is complete.
STEP 6:
Complete the “Asset Description” and “Installation Options” sections.
Configure the other settings and click “
Save
”
to save your settings.
Installation type selection is not
required when using hardwire harness. (DR-HRN-2KHW)
DR-2000 Install Guide
