Compuprint 4051 plus, Руководство пользователя

Страница: 69 / 75

Options
A78408744-002
61
and close them.
Using Fanfold Paper through Automatic Sheet Feeder
Your printer allows to load the fanfold paper with the Automatic Sheet
Feeder (option) installed.
The paper width must be maximum 15 inches (381 mm) and it is advisable to
test it so that this feature can be correctly performed.
Follow the sequence:
1. Make sure that the fanfold paper is in parking position and that the
printer is idle.
2. Press the
SHIFT
key and then
PATH
key. When the display shows the message
Fanfold Thru ASF
release the key or do not press it within 0.8 sec.
3. Place the drive selection lever in
the fanfold position.
4. Load paper as explained before and then proceed with your printing job.
You will see the fanfold that comes through the Automatic Sheet Feeder
and positions itself towards the front of the printer.
It is advisable to remove the output stackers, if installed, from the
Automatic Sheet Feeder to facilitate the paper exit.
How to Keep the Automatic Sheet Feeder Clean
Your Automatic Sheet Feeder has been designed to operate reliably over a
long period of time with minimal care and attention. However, it is
advisable:
•
Remove the dust from the ASF by first removing it from the printer. To
remove dust and paper particles from the ASF you should use a soft
brush.
•
The pick-up rollers and printer platen may become slightly less efficient
with use, therefore they must be cleaned periodically by a lint-free cloth
and a suitable platen cleaner. Please contact your dealer for suitable
platen cleaner.
Do not use platen cleaner on the plastic parts of the printer or ASF
since platen cleaner will melt plastic.