Compuprint 4051 plus, Руководство пользователя

Страница: 25 / 75

Configuring the Printer
A78408744-002
17
ON LINE Key
ON LINE
Normal
Function
•
Pressing this key you will obtain different results
depending on the printer status:
•
When the
READY
indicator is lit on, pressing this
key you will cause the stop of the printing at the
end of the current line; the
READY
indicator
blinks if there is some data left in the Input
buffer, otherwise the indicator is turned off and
the
Wait
message will be displayed.
•
When the
READY
is unlit or is blinking pressing
this key the printing will be enabled and the
READY
indicator is turned on.
•
Pressing this key while powering the printer on,
the message
Printing test
is displayed and
the check test is executed. If you want to stop the
self-test press this key again.
Program
Function Pressing this key you will obtain different results
depending on the interface configuration (parallel or
serial interface).
•
In parallel configuration, the information in the
Input buffer is reset and the
Buffer cleared
message will be displayed.
•
In serial configuration, the information in the Input
buffer is reset.
LOAD/PATH Key
LOAD Normal
Function If you press this key while the printer is unable to
print you will obtain the following effects:
•
No action if paper is already present. The
Invalid
keypress
will be displayed
•
If paper is not present, pressing this key, the paper is
loaded according to the drive selection lever selection
•
If the ASF is installed, the paper is loaded from the
selected ASF bin.
PATH
Shift
Function This key selects the paper type and it is enabled when
the printing is disabled. The display shows the paper
type you can use. If you want to select the displayed
paper type, release the key and do not press it again
within 1 sec. The paper types are:
Fanfold - Labels - Fanfold Thru Asf - Manual -
Bin 1 - Bin 2