CompuLab SBC-FITPC3, Справочное руководство

Страница: 19 / 27

FACE MODULE interfaces
Revised December 2011 SBC-FITPC3
19
5.9 Miscellaneous
Table 13 Miscellaneous Signals
Signal Name Pin # Type Description Notes
FACE_PRSNT# PX1-B34 I
FACE module presence
detection. Must be connected
to GND.
PWR_BTN# PX1-A43 I
Power button - causes an SMI
or SCI to indicate a system
request to enter a sleep state. If
the system is already in a sleep
state, this signal will cause a
wake event. If PWR_BTN# is
asserted for more than 4
seconds, it will cause an
unconditional transition (power
button override) to the S5 state
with only the PWR_BTN#
available as a wake event.
Override will occur even if the
system is in the S1 state. This
signal has an internal pull-up
resistor.
SLEEP_S3# PX1-B43 O
S3 sleep power plane control.
Assertion of SLP_S3# shuts
off power to non-critical
components when system
transitions to S3, S4, or S5
states. De-assertion of
SLP_S3# turns on power to
non-critical components when
system transitions from S3, S4,
or S5 back to S0.
RESERVED
PX1-A4, PX1-B2, PX1-B3,
PX1-B5, PX1-B6, PX1-B10,
PX1-B20, PX1-B20, PX1-B26,
PX1-B27, PX1-B28, PX1-B29,
PX1-B30, PX1-B37, PX1-B46,
PX2-A2, PX2-A3, PX2-A5,
PX2-A6, PX2-B2, PX2-B3,
PX2-B5, PX2-B6, PX2-B28,
PX2-B29, PX2-B30, PX2-B31,
PX2-A35, PX2-B33, PX2-B34,
PX2-B35, PX2-B36, PX2-B37,
PX2-B38, PX2-B42, PX2-B43,
PX2-B45, PX2-B46
-
Reserved for future use.
Should be left unconnected.
NC
PX2-A8, PX2-A9, PX2-A11,
PX2-A12, PX2-B8, PX2-B9,
PX2-B11, PX2-A26, PX2-A27,
PX2-A28, PX2-A29, PX2-A30,
PX2-A31, PX2-A33, PX2-A34,
PX2-A36, PX2-A37
- Should be left unconnected.