Rev.01 03-27-17
Page 30 of 71
Compu-Aire
System status
All the I/O are shown and grouped in three categories. Output is shown in term of percentage.
Actual control functions are set as direct acting or reverse acting.
Universal inputs show all the analog sensors
Analog outputs shows the current output value in 0-100%.
0%
= 0Vdc
100% = 10Vdc
Optional sensors show derived reading from connected sensors. The following
calculated values are available.
o
Return/Outside air dew point
o
Return/Outside air enthalpy
o
24 hours temperature min/max
Figure 10. Universal inputs
Figure 11. Universal outputs
