31
Can I playback recorded video in main window?
Yes, you may deselect “Playback in PIP mode” in “Video/Audio” tab which can
be found under “Options” of ComproDTV 4.
You may also playback in sub window, then double click the screen to switch
the content of the main and sub window.
Why does the remote control fail?
The remote control sensor, which is plugged into the TV card, may be loose.
Please unplug it and plug it in again. You should also check the batteries of the
remote control. Do not use rechargeable batteries.
Verify that the
IR icon (ComproRemote) is in the system tray on the
lower-right corner of the screen. If you don't have ComproRemote on the
system tray, start the following program:
C:\Program Files\ Common Files\VideoMate\ComproRemoteDTV.exe
Then you should see the icon on the system tray. The IR icon should turn
bright when you press buttons on the remote.
If you see no response, please move your mouse cursor on the IR icon. If you
see it shows “No Device,” your drivers may not be not properly installed.
Please remove ComproDTV 4 using "Add/Remove programs" in the Control
Panel and reinstall it.
Some devices may emit the IR signals. Please check if there are any
microwaves or lights that may be doing this. And make sure as few cables as
possible are crossing the IR receiver.
Why are images scrambled
？
Please update the video and sound card drivers from vendors’ web sites.
Make sure the driver for motherboard chipset is also up to date. The default
drivers supplied with the Windows operating system are usually too old to
operate correctly. If you still have problems, please install th
e latest
ComproDTV 4 an
d driver from our website.
Why can’t I playback the recorded video?
The usual reason for this problem is conflict with some CODEC software, such
as Nimo, K-Lite, and Stormcodec. This kind of software forces applications to
use their CODEC for play back. Therefore, the recorded file cannot be played
