14
Note
You must correctly install the Power Up connectors to use Remote Power
On/Off function. See Hardware Installation section above for more information.
There will be a two second delay before the PC powers on.
You
have to install the TV card’s driver correctly before using this feature.
This feature cannot logon your system. You may need to enter your user name
and password.
Remote Power Off
There are two situations for this operation.
When not watching TV, i.e. no ComproDTV 4 running:
Just press the
“CLEAR” button on the lower-left corner on the remote keypad;
you will see a dialog as shown below. Program will countdown 20 seconds to
shutdown the computer. If you don’t want to shut down the computer, please
press the CLEAR button again, in other words, pressing the CLEAR key a
second time is the same as pressing the “Cancel” button. You may also use
your mouse to press the cancel button. Press OK to immediately shutdown the
computer.
When watching TV, i.e. ComproDTV 4 is running:
Just press the CLEAR button on the lower-left corner on the remote keypad
repeatedly, you will see the text on the screen turns to SLEEP OFF, SLEEP
ON - 30 MINUTES, SLEEP ON - 1 HOUR, SLEEP ON - 2 HOURS, and
SHUTDOWN. When the text shows SHUTDOWN, it will countdown 20
seconds to shutdown your
computer. If you don’t want to shutdown the
computer, please press the CLEAR button again.
Note
Make sure you save all open files before using remote shutdown function.
