7. Serial Control
The RS-232 port lets you send and receive simple RS-232 signals
between a controller and a serial device via the switcher which is
connected to the RS-232 port (3.81mm 3P captive screw connector) and
outputs via CAT5e/6/7 cable.
The example, illustrated in Figure 2, shows a PC or control system that is
connected to the switcher via the RS-232 port (3.81mm 3P captive
screw connector). The HDBT output connector on the switcher is
connected via CAT5e/6/7 cable to an HDBT receiver. This HDBT receiver
connects to a projector via HDMI and RS-232.
The PC or control system sends RS-232 signals control projector, by the
switcher and HDBT receiver.
Figure 2
8. IR Control Operations
The IR control can realize two-way control function, and the 8 IR OUT
ports are corresponding to the 8video inputs one to one, and switch
following the corresponding video source.
The example, illustrated in Figure 3 and Figure 4 :
1)
To control far-end display: The IR Receiver (Rx1) is connected to the
switcher IR IN port. The HDBT output connector on the switcher is
P
age 7
