Composite-ARF BAE Hawk, Инструкция по эксплуатации, Страница: 18 / 32

B.A.E. HAWK
www.carf-models.com
Main gear door installation.
The main gear doors are supplied moulded in one piece. These should be separated
into three pieces, the larger inner section is hinged using the milled phenolic hinges and
the supplied rod and tube. The centre section will be fitted to the struts and the small
base piece notched to clear the strut, or hinged if you chose.
Operation of the inner doors requires two large bore approx 1.5” stroke air rams. These
can be bought as part of the optional Composite ARF air pack #200550 or sourced
individually. We recommend Robart 3/8” air cylinders F-RB165. These are angled and
overlap each other in the wing centre section.
The hinges need separating from the phenolic sheet and the retaining tags sanding off.
It is good practise to tack glue the hinges and tubes in position to allow easy adjustment
18
Fig 41
Fig 40
Fig 45
Fig 43
Fig 44
Fig 42