Compool Cp3810, Инструкция по установке и эксплуатации

Страница: 31 / 43

29
Compool Cp3810
Programming
Typically only the L key (filtration) needs to be programmed. Other Equipment keys can be
programmed the same way.
• To program filtration
1. Press the Program key.
2. Press the L key.
3. Press the Hours/Minutes key to
set the START TIME.
4. Press the Enter key.
5. Press the Hours/Minutes key to
set the RUN TIME.
6. Press the Program key to end.
Programming additional Run Times
It is possible to program up to four separate START TIME and RUN TIME’s for each
equipment key. Follow the previous example to step 2, then press the same equipment key until
PROG 2 is displayed. Continue with steps 3-6 to enter the second START TIME and RUN
TIME.
Programming a Time-out
By default, manually activated equipment will Time-out after 12 hours. However, it is possible
to program a different Time-out period for each equipment key.