Component Playgrounds PH52, Руководство пользователя

Страница: 9 / 33

2.b. Assemble the legs into the triple end and top rail as shown below.
1. Slide the end of the drilled legs into the triple end.
2. Align the holes in the legs with the holes in the triple end and
join together using a
9/16
” x 2
3/4
” hex bolts and
9/16
” nylock nuts.
3. Insert and tighten set screws into triple end with allen wrench
provided.
Assembling ladders and attaching to deck support structure (please read through all instructions before
continueing)
Install will be easier by completing 4.a. before continueing. (The rest of step 4 will be shown later)
4.a. Make a mark 108” up from the bottom of the ladder onto each ladder rail. Move the adjustable sleeves to
these marks and position them to receive the horizontal ladder by turning them to point at a 90 degree angle (to-
wards what will become the inside of the Horizontal ladder section of the structure.) Secure the set screws. The
sleeves should sit 18” apart on center in order to line up with horizontal ladder.
Notice the direction of the rungs on the ladders:
The ladder
with
the
holes drilled has the
rungs facing up.
The ladder without
the holes drilled
has the rungs facing
down.
108”
18”
18”
2
3
1