background image

 
 
 

Residential Products 

Limited Lifetime Warranty  

 

Component Playgrounds works to build heavy duty products that will stand up to the heavy use of active children. 
You can trust Component Playgrounds because of the way we design and build our products. We make products that 
are simple to own, and easy to maintain. This adds up to the best value on playground products that you can count 
on, and that kids will play on time after time.  

Component Playgrounds warrants to the original purchaser/property owner that its’ residential grade products are 
free from defects in materials and workmanship. This warranty is non-transferrable and will be honored only after 
proper registration.  

This warranty is not extended to cosmetic items such as scratches, dents, fading, discoloring, paint wear, rust, 
weathering, or decorations. The warranty as stated is valid only if equipment is properly installed as detailed in the 
installation instructions provided and is used in a normal and expected manner. Excessive and or use above that 
which is normally expected may void the warranty. All parts are subject to normal wear for the purpose of which they 
were designed.  

When attached to the structure, plastic slides should not be lifted up from the bottom for any reason. Cracks at the 
top of the slide that result from lifting the bottom of the slide will not be covered under the terms of this warranty.  

This warranty is void should the equipment be subject to vandalism, misuse, neglect, abuse, improper installation, 
tampering, or accident. This equipment is not to be altered, or modified, by anyone other than Component 
Playgrounds or its authorized agent. This warranty does not cover damage resulting from flood, fire, catastrophe or 
other acts of nature.  

To the extent permitted by law, Component Playgrounds shall not be liable for any direct, indirect, special, incidental, 

or consequential damages.  

Should it be found that your product has parts that are defective within the warranty period, contact Component 
Playgrounds. 

Unauthorized returns will be refused and returned to sender

. Defective part(s) must be photographed 

from a minimum of three different angles that clearly show the problem, and the installation of the defective part by 
itself and in relation to the rest of the structure. After speaking with a representative at Component Playgrounds: 
Return parts, freight prepaid, to the Component Playgrounds’ plant with proof of purchase for repair or replacement. 
Component Playgrounds will evaluate the part(s) and the photographs and decide if the part(s) in question should be 
repaired or replaced. This warranty does not cover costs related to removal, transportation and/or labor.  

This equipment is rated as commercial grade for residential use and is intended to be used in a private residential 
environment. This equipment may not meet all of the safety guidelines as described by the CPSC as it relates to 
public use/commercial playground equipment. For more information on public or commercial playgrounds, please visit 

www.cpsc.gov

.  

Component Playgrounds sales representatives or its agents are not authorized to modify or substitute claims which 
are not part of this exclusive written warranty. This warranty is void if the product is in any way modified from its 
original state, or if it is used for purposes other than the purpose for which it was intended.  

*For children with special needs who may spend many hours of the day swinging, we recommend our heaviest swing 
set, the Arch Swing Model. This is the product for you!  

 

Содержание HL50-10













Отзывы: