CompeGPS TwoNav Aventura Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 130

CompeGPS TwoNav Aventura Скачать руководство пользователя страница 57

CompeGPS Team S.L.

http://www.compegps.com

http://support.compegps.com

.

4.9.11

Coordinates

You may choose the type of coordinates (UTM, Latitude/Longitude, BGN…) and datum (WGS 84,
European 1950, Geodetic Datum 1949, etc.) with which you wish to work in TwoNav.

This setting will be the one used when introducing any coordinate into the program or when
creating elements the kind of waypoints routes or tracks.

If an element (map, waypoint, route or track) that uses a system of coordinates of different a
datum is opened, TwoNav will detect it and will place it in the correct position.

Besides, from this option, you may configure the order in which the degrees will be displayed.

By default, TwoNav Works with Lat / Long and Datum WGS84 Coordinates.

4.9.12

Time zone

TwoNav lets you choose the time it is according to the Universal Time Coordinates (UTC) that will
appear by default with the time-zone corresponding to the Central European Time (CET).

You may also set the Summer Time automatically if you wish, so TwoNav carries out the
seasonal time change.

Note

: TwoNav keeps the time updated as long as the device receives a GPS signal. Usually,

inside the buildings, the signal from the satellites is not received unless there is a repeater, so the
time and also the,

night vision

, will be affected.

4.9.13

Default settings

This option lets you re-establish all the settable parameters to its initial status. All the options that
have been manipulated will be modified, time zone, volume, folders and other tools that you may
have previously established.

4.9.14

Device ID

The „Device ID‟ is an alphanumeric identifier exclusive to your device. This identifier is necessary
in order to activate TwoNav and any map you want to use in the device.

4.9.15

About

„About‟ shows you which TwoNav version the device is working with. It will be displayed on the

top left hand corner of the screen.

To know the version of the TwoNav program installed in your device, it is very important to check
out doubts or software updating.

4.9.16

AA batteries

Besides Li-Ion battery, TwoNav Aventura can use AA batteries as energy source.

To that end, AA batteries accessory will be needed. You can find it at

www.compegps.com

,

www.twonav.com

or visiting your CompeGPS products distributor.

«
...
55
56
57
58
59
...
»

Содержание TwoNav Aventura



































































































































Отзывы:

Нет отзывов