CompassPools Rollo Cover, Руководство по установке

Страница: 69 / 71

2. Maintenance
• The in-roller motor is maintenance free.
• Maintenance of the slats:
At least twice a year the slats have to be cleaned from lime and dirt using a high-pressure cleaner.
Do NOT use a steamer.
The open side of a transparent or solar slat can contain algae. Use an algaecide and spread it over
the cover. The water needs to meet the normal demands for chlorine- and ph value.
The water temperature may not exceed the 32 °C.
Do not walk needlessly on the pool cover. The cover is not a playground for children!
When exposed to sunlight the slats must always be in contact with the swimming pool water, this
means floating on the water (the cover is closed) or rolled up around the shaft under water (the
cover is open). Without water, the slats must be protected against direct sunlight. Therefore, check
the water level regularly.
At extremely low temperatures (frost) the slats become more fragile. The pool cover may not be
trod on or come into contact with hard objects.
During a hail-storm the pool cover must be opened in order to prevent damage.
The filtering installation must always be operational when the cover is closed.
Just underneath the slats the water is strongly warmed up by the solar slats. The filtering
installation
must be operational in order to distribute this heat and to cool off the slats. In extreme
situations damage to solar slats can occur when the heat immediately below the slats is not
circulated.
Condensation : the slats are waterproof and finished with end caps. PVC lets the vapour through
and condensation in the closed chambers of the slats is inevitable. These water drops are visible
inside the solar and transparent slats
.