CompassPools Rollo Cover, Руководство по установке

Страница: 67 / 71

VII.8 : Problem solving with overview of the error codes
WAIT 20 MINUTES – RESET THE ERROR
WITH THE KEY MAXIMUM TEMPERATURE OF THE CONTROL BOARD
HAS BEEN REACHED TEMPERATURE
CHECK YOUR CABLES
IN CASE THE CABLING IS OK, MEASURE
THE DC VOLTAGE BETWEEN 3-4 (12 Vdc)
IF CABLES AND PRINT ARE OK,
CONTACT YOUR DEALER THE CONTROL BOARD DOESN’T GET ANY PULSES
FROM THE ENCODER NO PULSES
CHECK IF THE ROLLER IS NOT BLOCKED
IF ALL IS OK RESET THE ERROR WITH
THE KEY
IN CASE THE ROLLER IS FREE AND YOU
STILL HAVE THE SAME ERROR CONTACT
YOUR DEALER THE MAXIMUM CURRENT OF THE MOTOR HAS BEEN
REACHED MAXIMUM CURRENT
CHECK WATER LEVEL OF THE POOL
AND RESET THE ERROR WITH THE KEY
AS SOON AS IT IS CORRECT NO CONNECTION BETWEEN 10-11 ON THE CONTROL
BOARD
WATER LEVEL NOT CORRECT OR NO BRIDGE
BETWEEN 10-11 WATER LEVEL 1
TURN THE KEY ON THE KEYSWITCH TO
“1” NO CONNECTION BETWEEN 8-9 ON THE CONTROL
BOARD. STOP ACTIVATED
WAIT 10 MINUTES – RESET THE ERROR
WITH THE KEY
FACTORY SETTING OF MAXIMUM
RUNTIME = 10 MINUTES MAXIMUM RUNTIME (10 MINUTES) OF THE MOTOR
HAS BEEN REACHED RUNTIME ERROR
ACTION EXPLANATION ERROR MESSAGE
Errors can be reset by turning the key switch to “0” and again to “1” !!!