Fibre Channel SAN Switch 2/16 Installation Guide
2–3
Installing the Fibre Channel SAN Switch 2/16
Installation and Safety Considerations
Read the following sections for installation guidelines. Install the SAN Switch 2/16 in
one of the following ways:
•
as a stand-alone unit on a flat surface, or
•
in the Compaq 9000 Series (or comparable) Rack using the Rack Mount Kit
contents as outlined in Table 2–1.
Table 2–1: Shipping carton contents
Number
Item
1
One StorageWorks by Compaq Fibre Channel SAN
Switch 2/16 Product accessory bag containing CD,
license, documentation and Release Notes
2
Two standard AC Power Cords
3
One RS-232 Serial cable (convertible to an RJ-45
connector)
4
StorageWorks SAN Switch 2/16 by Compaq
5
Rack Mount Kit containing:
Slide Assembly, includes one Inner and one Outer
Slide Rail, with the following items preinstalled:
•
L-Bracket, Slide Mount, 3-hole (4)
•
Power Cord Clips (6)
6
Pouch containing Rack Mount hardware
•
3-hole Bar Nuts (4)
•
10-32 x 3/8” Phillips Head Screws (10)
•
8-32 x 3/16” Phillips Head Screws (10)
•
Square Alignment Washers (8)
•
Right and Left Rear Rack Mount Brackets (2), use
if installing so that port side slides from the rear of
the rack
•
Right and Left Front Mount Brackets (2), use if
installing so that power supply end slides out from
the front of the rack
•
Rubber Mounting Feet (4), use if installing on a flat
surface
