Hard Drives in the Side Access Drive Bays
The side access drive bays provide room for four half-height 3.5 inch Fast
SCSI-2 hard drives. To remove a hard drive:
1. Remove the Side Access Door.
2. Remove power and signal cables.
3. Squeeze the two retaining clips on each side.
4. Slide the storage device out of the drive bay.
5. Reverse steps for installation.
6. Replace Side Access door.
7. Run the EISA Configuration Utility if replaced drive is a different size
than the drive it is replacing.
Содержание ProSignia 500
Страница 18: ...Miscellaneous Parts Battery Clock Module ...