Removal and Replacement Procedures
2-13
Power Supply Blank
To remove the power supply blank:
1.
Unlock the hinge on the cable arm and swing the arm away from the power supply area.
2.
Press the locking latch
.
3.
Pull the blank out of the bay
.
1
2
Figure 2-10. Removing the power supply blank
CAUTION:
Always populate power supply bays with either a power supply or blank. Operating
the server without installing a power supply or blank results in improper airflow and improper
cooling that can lead to thermal damage.
To replace the power supply blank:
1.
Slide the blank into the bay until it locks into place.
2.
Swing the cable management arm into place and lock it.
