Modular SAN Array Fabric Switch 6 User Guide
D-1
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: i-appd Laser Precautions and Fibre Cables.doc
Codename: Millebourne Part Number: 230394-002 Last Saved On: 7/17/02 1:46 PM
D
Laser Precautions and
Fibre Channel Cables
Laser Precautions
WARNING: To reduce the risk of injury from laser radiation or damage to the
equipment, observe the following precautions:
•
Allow only Compaq Authorized Service Technicians to repair the
equipment.
•
Do not open any panels, operate controls, make adjustments, or perform
procedures to a laser device other than those specified herein.
•
Do not stare into laser beam when panels are open.
SFP and Fibre Channel Cable Connector Cleaning Considerations
Optics are susceptible to anything that hinders light transmission. Consequently,
manufacturers of both 2-Gb Small Form Factor Pluggable Transceiver modules
(SFP) and Fibre Channel Cable Connectors provide dust covers to protect the optical
areas and ensure optical signal integrity for initial system configuration. If the fiber
optic interconnects are disengaged, the optical tips can be soiled by human touch,
damaged from dropping, or simply collect dust debris when exposed to the open air
for extended time periods. A contaminated optic tip may not be visible to the naked
eye and could potentially degrade performance of your system.
