manualshive.com logo in svg

Compaq Evo w4000 CMT, Справочник по аппаратуре

Поделиться
Скачать
Compaq Evo w4000 CMT Скачать руководство пользователя страница 24

2–6

Hardware Reference Guide

Hardware Upgrades

Removing Bezel Blanks 

1. If you have locked the Smart Cover Lock, use Computer Setup to 

unlock the lock.

2. Shut down the operating system properly, then turn off the 

computer and any external devices. Disconnect the power cord 
from the power outlet and disconnect any external devices.

3. Remove the computer access panel. Remove the front bezel.

4. Gently pull the subpanel, with the bezel blanks secured in it, 

away from the front bezel, then remove the desired bezel blank.

Ä

CAUTION: 

Hold the subpanel straight when you pull it away from the 

front bezel. Pulling the subpanel away at an angle could damage the 
pins that align it within the front bezel.

Removing Bezel Blanks from the Subpanel

✎

When replacing the subpanel, ensure that the aligning pins and any 
remaining bezel blanks are in their proper orientation.

244947-002.book  Page 6  Thursday, November 15, 2001  10:05 AM

Содержание Evo w4000 CMT



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды