manualshive.com logo in svg

Compaq Evo w4000 CMT, Справочник по аппаратуре

Поделиться
Скачать
Compaq Evo w4000 CMT Скачать руководство пользователя страница 22

2–4

Hardware Reference Guide

Hardware Upgrades

Removing the Computer Access Panel

Before removing the access panel, lay the computer down on its large 
base for greater stability.

1. If you have locked the Smart Cover Lock, see the previous 

section on Smart Cover Lock or use Computer Setup to unlock it.

2. Shut down the operating system properly, then turn off the 

computer and any external devices.

3. Disconnect the power cord from the power outlet and disconnect 

any external devices.

Ä

CAUTION: 

Before removing the computer access panel, ensure that the 

computer is turned off and that the power cord is disconnected from the 
electrical outlet. Loosen the two screws that secure the access panel to 
the computer chassis.

4. Slide the access panel back about 1 inch (2.5 cm), then lift it up 

and off the unit.

Removing the Computer Access Panel

To replace the access panel, reverse steps 1-4.

244947-002.book  Page 4  Thursday, November 15, 2001  10:05 AM

Содержание Evo w4000 CMT



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды