Compaq Cabinet H9A11, Инструкция по установке и эксплуатации

Страница: 17 / 32

Installation
H9A11 Cabinet Installation/Owner's Guide 2–5
6. Refer to Figure 2-2. Remove the four shipping bolts
ž and brackets Ÿ that secure the
four cabinet leveler feet
to the pallet œ.
__________________________ Note _____________________________
The ramps attach to the front of the pallet. Therefore, the cabinet will have to be
rolled frontwards down the ramps.
____________________________________________________________
7. Remove the ramps
¡ from the shipping carton and set the ramps in the holes ¢
provided at the front of the pallet
œ. Ensure that the arrows  on the ramps match the
pallet arrows
 as shown in Figure 2-2.
_________________________ Caution ___________________________
In the next step, the leveler feet must be fully retracted to prevent contact with the
ramp or the floor when the cabinet is unloaded from the pallet.
____________________________________________________________
8. Adjust the four cabinet leveler feet
and the leveler foot on the stabilizer bar ‘ to the
maximum upward position.