Compaq Armada 1500C series Скачать руководство пользователя страница 68

Страница: 68 / 135

Computer Removal and Replacement Procedures

5-3

5.3.1 Disconnecting the AC Power

The first procedure that should be performed on the computer is to disconnect the
power supply and any external devices.

Close all applications and turn off the computer.

Turn off and disconnect any external devices.

Disconnect the AC power cord from the power source.

Disconnect the external power supply from the computer.

If the computer is docked in the convenience base, see Section 5.3.2 for undocking
instructions.

5.3.2 Undocking the Computer

If the computer is docked in the convenience base, it must be undocked before
performing additional work. Complete the following steps to undock the computer. If
the computer is not docked in the convenience base, proceed to Section 5.3.3.

Disconnect the AC power and any external cables (Section 5.3.1).

Close the computer.

Pull the docking lever forward to undock the computer.

Lift the computer from the convenience base.

Содержание Armada 1500C series








































































































































Результаты поиска

Содержание Armada 1500C series

Отзывы:

Похожие инструкции для Armada 1500C series

Бренды по названию

Популярные бренды

Compaq Armada 1500C series, Руководство по обслуживанию

Результаты поиска

Содержание Armada 1500C series

Отзывы:

Похожие инструкции для Armada 1500C series

Бренды по названию

Популярные бренды