Compaq Armada 1500C series Скачать руководство пользователя страница 42

Страница: 42 / 135

Troubleshooting

2-29

Solving PC Card Problems

Table 2-23

Solving PC Card Problems

Problem

Probable Cause

Recommended Action(s)

Computer does not beep when
PC Card is inserted but PC
Card works correctly.

System beeps are turned
down.
PC Card sound effects have
been disabled.

Press Fn+F5, then press the right arrow key
to increase the system beeps volume.
In Windows 95 or later, double-click PC Card
icon

⇒

Global Settings tab. Deselect Disable

PC Card Sound Effects.

Computer does not beep when
PC Card is inserted and PC
Card does not work.

PC Card is not inserted
properly.
The PC Card slots have been
disabled.

Remove and reinsert the card gently to
avoid damaging the pins.
Run Computer Setup to enable the PC Card
slots. When the system starts, press F10
then select Computer Setup

⇒

Other

Devices

⇒

PC Card Controller

⇒

Resources.

Deselect the “Disabled” check box.

In Windows 95 or later, click Start

⇒

Settings

⇒

Control Panel

⇒

System

⇒

Device Manager

⇒

PCMCIA Socket. Double-

click the Texas Instruments TI-1131 CardBus
controller to view device properties. Deselect
the “Disable in this hardware profile” check
box.

Card or card driver is not
compatible with the computer
or with the operating system.

Contact service provider for a list of
compatible PC Cards.

Computer beeps twice, but
modem and/or fax does not
work.

Telephone cord is not plugged
in all the way.

Verify that the telephone connection is
secure.

The wrong COM port is being
used to access the card.

Verify the COM port assigned to the card and
within the application is correct.
In Windows 95 or later, click Start

⇒

Help

⇒

Contents

⇒

Troubleshooting

⇒

Problem.

Follow the instructions on the screen.

Computer beeps twice but
network card does not work.

Network server is unavailable. Contact system administrator.

Computer beeps twice when a
storage card is inserted, but
the card does not work.

The wrong drive letter is being
used to access the storage
card.

Open Windows Explorer and verify the drive
letter.

PC Card does not work

Windows NT was running
when the PC Card was
inserted.

Turn off the computer and reinsert the PC
Card.

Содержание Armada 1500C series








































































































































Результаты поиска

Содержание Armada 1500C series

Отзывы:

Похожие инструкции для Armada 1500C series

Бренды по названию

Популярные бренды

Compaq Armada 1500C series, Руководство по обслуживанию

Результаты поиска

Содержание Armada 1500C series

Отзывы:

Похожие инструкции для Armada 1500C series

Бренды по названию

Популярные бренды