Compaq 2500 - ProLiant - 64 MB RAM, Руководство по установке

Страница: 83 / 111

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-24 Overview of Installing ProLiant 2500R Server and Hardware Options
Writer: BETTYD Project: Overview of Installing ProLiant 2500R Server and Hardware Options Comments: Rack chapter for Brenda Pereira's Guide
File Name: G_CH04.DOC Last Saved On: 8/2/96 10:57 AM
1. For easier handling, first slide the server into the rack, then attach the
cable management arm to the cable management arm bracket. If you
attach the arm before loading the server in the rack, the arm may swing
around and interfere with the loading process.
2. After you have loaded the server into the rack, attach one end of the
cable management arm to the server's cable management arm bracket
using two M6 x 1.0-12L Phillips screws. Align the arm to the bracket as
shown in the following figure.
CZR4-016.EPS
Figure 4-16.
Attaching the cable management arm to the cable management
arm bracket
3. Align the other end of the cable management arm on the outside of the
rear brace of the rack. Align a screw retaining plate on the inside of the
rack. Attach the arm to the rack with two 10-32 x 5/8-inch Phillips
washer-face hex-head screws.