58
10. PERIODIC INSPECTION
Every
24 Months
the SQR reserve must have a periodic inspection and this event entered (online)
in the packing and inspection record.
This periodic check/inspection is a visual procedure. It should be carried out by a trained person in
a clean, well-lit place.
10.1 Checking the canopy surface
Spread the canopy out – ideally after a 24 hour airing – and begin by working round the canopy
edge. Inspect the fabric for tears, blemishes, stains, burns, abrasion or damaged seams. If the cano-
py shows signs of rot/mildew the fabric strength could be affected. The reserve must be sent to the
manufacturer for a factory check.
Work your way around the canopy, panel by panel, inspecting all the surface until you come to the
centre. Look carefully at the area around the packing loops.
Look at the detail at the suspension line attachment points. The attachments must show no sign of
damage or flaw!
10.2 Checking the lines
Secure the bridle and work your way up each suspension and centre line. Check the whole length
for damage and abrasion, and that all sewing are complete and seams are in good order. Check the
line loops (especially the inner side) for external wear, fraying and damage!
