45
Fig 17 – Adapting to the inner container width
9.5 Matching the inner container width
Check that the bottom edges of the canopy form a straight line. The width of the prepared canopy
should be symmetrically divided by the width of the container, starting from the central width as
a basis. Using the SQR container with about 22 cm width, will result around 7 container widths
(3 container widths either side of a middle width). The central width will remain in place, while 3
S-folds below and 3 S-folds over the central width, will make a vertical concertina shape to fit the
width of the inner container.
