7
CAST IRON RING BURNERS OWNERS MANUAL
IMPORTANT INFORMATION FOR USE
During operation all surfaces will be extremely hot and
should not be touched or handled.
Handle with care even after brief use, always pick up
using the handle not the cylinder.
Take care that the primary air intakes, located on the
burner tube of this appliance are not obstructed, or that
air flow is restricted by placing items or other appliances
close to or adjacent to the inlets.
Do not attempt to move or relocate the appliance when
it is operating, extinguish the burner and allow to cool,
disengage the gas cylinder then move the appliance.
This appliance is to be stored in a dry and
well-ventilated location free from direct sunlight.
Do not store when still connected to the cylinder.
Make sure that the cylinder is disconnected and is stored
in a well ventilated area, out of the reach of children,
free from direct sunlight, heat and ignition sources.
If being stored indoors, ensure that the location complies
with the standard AS/NZS 1596.
Never leave appliance unattended when operating.
Do not use a multiple appliances to heat a single utensil.
Only cooking vessels with a minimum diameter of 25 cm
and a maximum diameter of 30 cm are to be used with
this appliance.
Do not use as a space heater.
Use as a cooking appliance only, is not to be used as
heater or modify for any other reason.
Avoid boil over and spills on to burners.
After use, turn the gas cylinder valve off, wait for the
flame to go out, then turn the appliance control valve(s)
off.
Avoid twisting or kinking the flexible hose.
To check if gas remains in the cylinder, disconnect from
the appliance and hold the cylinder in a vertical position
then shake from side to side, if there is a sound or feel of
liquid movement inside, the cylinder contains gas.
