COMPANION 10000071, Руководство пользователя

Страница: 6 / 16

6
TO RECHARGE BATTERY
The Rover Li 40 uses a Lithium Ion Phosphate battery. There are three ways the battery can be charged - DC Cable,
240V AC Adaptor or Solar Panel. The power station can only be charged using one of the above options as all three use
the one input.
Note: Fully charge the battery at least every six months. Overloading the battery or storing it for too long without
charging it may cause permanent damage to the battery.
CHARGING BY 240V AC ADAPTOR (INCLUDED)
Step 1. Turn on the power station by holding the power button for three seconds.
Step 2. Insert the adaptor plug into the input socket on the side of the power station and plug it in to mains 240V AC.
Turn on the wall plug.
Step 3. The power station will automatically begin to charge, the battery status will be shown on the LCD display
and will also show the minutes remaining until fully charged. Note: The LCD display will show the net input/output as
described in the “Understanding your LCD Display” section of the manual.
Step 4. The power station will automatically turn off when it is fully charged. Estimated charge time using the 240V
AC adaptor is approximately 8-10 hours.