10
Anderson Output
There is an Anderson output located on the side of the power station which uses the 50A connector. It has a maximum
output of 10 Amp. To use this output you need to turn on the power station and then press the “Power” button for three
seconds to activate the power outputs. Then press the “Anderson On/Off” button for 3 seconds.
Note:
The power station has the following protective functions - over temperature protection, under temperature
protection, overvoltage protection, undervoltage protection, overcurrent protection, short circuit protection and
incorrect polarity protection. If these are activated the following symbol will be displayed on the screen.
Remove all Inputs and Outputs and turn the power station off and back on.
LED Light
The power station has a useful LED light with three light functions.
To power on the LED light, press and hold the light power button for three seconds. The light power button is located
next to the light on the side of the power station.
To cycle through the available light functions (Solid, Slow Strobe, Fast Strobe), press the LED light power button.
To turn the light off from any light function, press and hold the LED light power button for three seconds and the light
will switch off.
Содержание 10000071
Страница 1: ...ROVER LiTHIUM 40AH POWER STATION OWNERS MANUAL Part No 10000071...
Страница 14: ...14 NOTES...