Compak PKE, Инструкция по эксплуатации

Страница: 36 / 42

ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 12/02/2021 | K07173H01
36
12.3.1. ADJUSTING THE PARALLEL
SYSTEM
A) Loosen the screws of the
grinding regulator ( ) with the
help of a Torx T20 screwdriver,
according to (Fig.10.) For grinder models
with micrometric system PARALLEL,
before removing the grinding regulator
( ), turn the regulating brake (
) counterclockwise to free it from the
PARALLEL fixing shoe.
B) Adjust the upper burr holder to the point
that the burrs touch - point (
!
). Replace
the grinding regulator ( ) and match the
regulator brake with the fixing shoe.
Once the brake and the shoe are fixed,
match point 0 of the regulator with the
indicator. At that point we tighten the
3 screws with Torx T20 according to
(Fig.10) .
12. MAINTENANCE
Fig. 15
!
Punto 0
Regulator
limit stop
Locking
shoe
Fig. 16
Indicator