CompAir Mako CMM, Руководство пользователя

Страница: 16 / 45

3. Safety regulations
3-5
After cleaning, remove all covers and
masking completely and allow the unit to dry
before returning unit to service!
Always re-tighten all threaded connections
which have been loosened for maintenance
and repair work.
If the set-up, maintenance or repairs require
the
removal of safety equipment, this
equipment has to be replaced and checked
immediately.
Ensure that consumables and replacement
parts
are disposed of in a safe and
environmentally friendly manner in
accordance with all applicable local, regional
and national laws, rules and regulations.
Use only genuine MAKO fuses with the
specified current rating.
Switch off the
machine/unit immediately if trouble occurs.
Work on the electrical system or equipment
must only be carried out by a skilled
electrician
or by specially instructed
personnel under the control and supervision
of such an electrician and in line with the
relevant electrical engineering rules.
The electrical equipment of this unit is to be
inspected and checked at regular intervals.
Defects
such as loose connections or
s c o r c h e d c a b l e s m u s t b e r e c t i f i e d
immediately. Necessary work on live parts
and elements must be carried out in the
presence of a second person who can cut off
the power supply in case of danger by
operating the emergency shutdown or main
power switch. Secure the working area. Use
insulated tools only.
Carry out welding, flame-cutting and grinding
work on the machine/unit only if
this has been expressly authorized, as there
may be a risk of explosion and fire.
Before carrying out welding, flame-cutting
and
grinding operations, clean the
machine/unit and its surroundings from dust
and other inflammable substances and
3.6 Warning Of Special Dangers
Electric energy
Gas, Dust, Steam, And Smoke
make sure that the premises are adequately
ventilated (risk of explosion)!
Observe and adhere to any existing
regulations valid for the place of operation!
Work on high pressure air equipment must
only be carried out by persons with special
knowledge and experience of high pressure
air systems.
Check all lines, hoses and threaded
connections regularly for leaks and obvious
damage.
Damage must be Repaired
immediately. High pressure air may cause
serious injury or death.
Depressurize all system sections, pressure
pipes, tubing and hoses which are to be
removed in accordance with the specific
instructions for the assemblies concerned
before carrying out any repair work.
Compressed-air lines must be laid and fitted
properly. Ensure that no connections are
exchanged. The fittings, lengths and quality
of hoses must comply with the technical
requirements.
Units must never be operated in areas subject
to explosion hazards!
(Exception: Special units with the
corresponding technical modifications)
Pneumatics
Rooms Subject To Explosion Hazards
Danger !