CompAir Mako CMM, Руководство пользователя

Страница: 15 / 45

3. Safety regulations
3-4
elimination of danger has to be maintained
regularly and functionally checked at least
once a year. Faults observed have to be
immediately rectified and/or reported to the
responsible person.
Use only genuine MAKO spare parts.
Before removing or opening pressurized
components, positively isolate any source of
pressure and depressurize the entire system.
Never weld any pressure reservoir or change
it in any way.
If work which produces heat, flames or sparks
has to be carried out on or near this unit, the
adjacent components of this unit have to be
protected by means of non inflammable
material.
Before releasing this unit for operation after
maintenance or overhaul check that the unit
is functioning properly and the regulating,
shut-down equipment and safety interlocks
are working properly.
Electrical components and regulating
equipment have to be protected from the
ingress of humidity at all times.
Never use etching solvents which could attack
the materials used.
Avoid damage to the safety valves and other
pressure reducing components. Check in
particular for clogging caused by paint, oil
carbon or the accumulation of dust, which
could deteriorate the effectiveness of these
components.
Check the accuracy of pressure and
temperature indicators at regular intervals. If
the admissible tolerance limits have been
exceeded, these devices must to be replaced.
Before cleaning the machine with water or
steam jet (high pressure cleaner) or other
cleaning agents, initiate an electrical lock-out
procedure(see
section 3.5), cover all
openings which have to be protected from the
ingress of water, steam or detergents for
safety and/or functional reasons, in particular
electrical
cabinets, components and
connections.
Follow the adjusting, maintenance and
inspection activities and schedule set out in
the operating instructions. These activities
must only be carried out by skilled personnel,
under qualified supervision.
Maintenance and repair work may only be
carried out under the supervision of a person
who is qualified to do the work.
Inspection, maintenance and repair work may
only be carried out with the unit being at rest
and depressurized. Protective equipment to
be removed for this work has to be properly
refitted after completion of these activities.
Always use the correct tools for maintenance
and repair work.
Never use inflammable solvents or carbon
tetrachloride to clean parts. Take precautions
against
poisonous vapors from cleaning
agents.
In any work concerning the operation or
adjustment of the unit and its safety-oriented
devices or any work related to maintenance,
inspection and repair, always observe the
start-up and shutdown procedures set out in
the operating instructions.
Ensure that the maintenance area is
adequately secured.
During maintenance and when carrying out
repair work, cleanliness is very important.
Avoid the ingress of dirt by covering parts and
free openings with a clean cloth, paper or
adhesive tape.
After the completion of each repair, check that
all lines and components are clear of any
foreign material before assembly.
Care must be taken any time this unit is in
operation!
The employer has to inform the employee of
the dangers possibly arising during the repair
and maintenance of this unit as well as on how
to avoid them; the employee has to observe
all measures for safety at work. Safety
equipment for the prevention or
Maintenance And Repair